Home > Electronics >

Spedix IS25A 25A 20x20 4-in-1 BLHeli_S ESC
Spedix IS25A 25A 20x20 4-in-1 BLHeli_S ESC


 
Alternative Views:


Our Price: $46.99 CAD

Stock Status: In Stock
Product Code: ESC-SPX71072
Qty:

Description
 
Spedix IS25A 25A 20x20 4-in-1 BLHeli_S ESC


The board supports a continuous current of 25 amps, with burst support up to 35 amps for 10 seconds. The 8-pin socket allows for clean and simple builds when combined with a flight controller that has a compatible connector (pin-outs may need to be swapped!).



SPECIFICATIONS
  • Continuous Current: 25 amps
  • Burst Current: 35 amps ≥ 10 S
  • Input Voltage: 2-5 Cell LiPo
  • BEC: No
  • Current Detection: Yes
  • Dimensions: 29x32x5mm
  • Mounting pattern: 20x20mm
  • Mounting Holes: 3.7mm (M3 shoulder washers included)
  • Firmware: BLHeli_S (QH-15)
  • Input signal: PWM, Oneshot125, Oneshot42, Multishot, Dshot600



PACKAGE CONTENTS
  • 1 x 25amp 4in1 ESC
  • 1 x 10cm red & black 16AWG wire pre-soldered
  • 10 x M3 shoulder washers (8 required, 2 spare)
  • 1 x 25v 330μF Rubycon capacitor
  • 2 x 1mm JST-SH 8-pin connectors
  • 1 x Datasheet



Notice
  • If 5S is used, it's HIGHLY recommended to solder the included capacitor.
  • The amperage meter scale needs to be set to 200 for the current sensor to work.

Share your knowledge of this product. Be the first to write a review »