Home > FPV >

RunCam Micro Swift 3 FPV Camera
RunCam Micro Swift 3 FPV Camera

Alternative Views:

Our Price: $47.99 CAD

Stock Status:(Out of Stock)
Product Code: MICROSWIFT3-OR-L21

RunCam Micro Swift 3 FPV Camera

The best selling Micro Swift 2 just got better. The Runcam Micro Swift 3 now comes with a full-size lens and built-in Runcam control adapter. Control your FPV camera remotely with the built-in UART camera control technology and never use a menu cable again.

Runcam has replaced the GND and OSD pins on the camera with TX and RX pins allowing you to wire your camera directly to your flight controller for camera control. This allows you to setup your camera without the need for an additional resistor or capacitor.

  • Built-in remote control
  • Change camera settings via OSD
  • M12 lens CCD FPV camera

  • Model: Micro Swift 3
  • Image Sensor: 1/3" SONY Super HAD II CCD
  • Horizontal Resolution: 600TVL
  • Lens: 2.1mm (M12) FOV165°
  • Signal System: PAL / NTSC
  • Integrated OSD: Yes
  • One Key Scene: Personal / Lightrax / Outdoor / Indoor / Cloudy / Twilight
  • S/N Ratio: >60dB (AGC OFF)
  • Electronic Shutter Speed: PAL: 1/50~100,000; NTSC: 1/60~100,000
  • Auto Gain Control (AGC): Yes
  • Min. Illumination: 0.01Lux@1.2F
  • WDR: D-WDR
  • DNR: 2DNR
  • Day/Night: Color/Auto/B&W
  • Remote Control: Flight Controllers : BetaFlight 3.3 / ButterFlight 3.4 / Cleanflight 2.2
  • Power: DC 5-36V
  • Current: 60mA@12V / 120mA@5V
  • Net Weight: 11g (2.1mm)
  • Dimensions: L19mm*W19mm*H25mm

Download the manual - click here

  • 1 x Micro Swift 3 Camera
  • 1 x 6pin FPV silicone cable
  • 1 x Screw Set
  • 1 x Mounting Bracket
  • 1 x Manual

1. Flight controller wiring

Note: Take UART3 for example
RunCam Micro Swift 3

2. Betaflight 3.3 or above setting

RunCam Micro Swift 3

3. Remote control

Note: Take Mode-2 for example
RunCam Micro Swift 3

Share your knowledge of this product. Be the first to write a review »