Home > Electronics > Flight Controllers >

Matek F405-AIO Flight Controller - FC, OSD, PDB, BEC
Matek F405-AIO Flight Controller - FC, OSD, PDB, BEC


 
Alternative Views:


Our Price: $52.99 CAD

Stock Status:(Out of Stock)
Product Code: MATEK-F405-AIO
Qty:

Description
 
Matek F405-AIO Flight Controller - FC, OSD, PDB, BEC

The Matek F405 AIO FC is the latest Matek creation to come to market. After the huge success of its F405 flight controller, Matek has stepped up its game with the creation of the All-in-one F405. Boasting all of the features you expect from a high quality PDB, like both 5V and 9V power output, the F405 AIO is a cut above some of the other F4 AIO controllers currently on the market.

Matek's F405-AIO boasts every feature one could possibly want, and then some! With a Betaflight OSD, a 200A current sensor, up to 6S direct input, and many many more features, this board is a serious contender as your next!

FLIGHT CONTROLLER SPECIFICATIONS
  • MCU: 168MHz STM32F405
  • IMU: 32K ICM20602 accelerometer/gyro (SPI)
  • Max. 32K Gyro update & 16K PID Loop
  • OSD: BetaFlight OSD w/ AT7456E chip
  • Blackbox: MicroSD card slot (SD/SDHC)
  • VCP, UART1, UART2, UART3, UART4, UART5
  • Built in inverter for SBUS input (UART2-RX)
  • PPM/UART Shared: UART2-RX
  • SoftSerial on S5 & S6 optional
  • Smartaudio & Tramp VTX protocol supported
  • Spektrum BIND_PIN: RX4
  • WS2812 Led Strip : Yes
  • Beeper : Yes
  • RSSI: Yes


PDB SPECIFICATIONS
  • Input: 9~27V (3~6S LiPo) w/TVS protection
  • PDB: 4x30A (Max.4x50A), 6 layers*2oz copper PCB
  • Dual BEC: 5V 2A & 9V 2A
  • LDO 3.3V: Max.300mA for Spektrum RX
  • Current Sensor 200A (Scale 165)
  • Battery Voltage Sensor: 1:10 (Scale 110)
  • 2x LEDs for FC STATUS (Blue, Red)
  • 6x PWM / DShot outputs without conflict
  • 5x UARTs
  • 1x Group of G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
  • 4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
  • 1x pair I2C1 pads (for INAV firmware only)
  • 1x Side-press button for BOOT(DFU) mode
  • 36x51mm PCB with 30.5mm mounting holes & XT60 socket
  • Weight: 12g
  • w/ 1x Rubycon ZLH 35V/470uF (Low ESR)
  • w/ 4x M3 Anti-vibration Standoffs
  • w/ FR4 PCB Plate 36*36*1mm










PACKAGE CONTENTS
  • 1 x FC
  • 1 x Capacitor
  • 1 x Rubber Stand-offs
  • 1 x PCB Plate

Average Rating: 2 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Great when it works ! March 4, 2018
Reviewer: Jared D from Surrey BC  
This fc was super awesome right out of the box. Great features , easy to set up.

However , the usb port broke after about a week ( no crashes ) and you had to hold the cord a certain way to get it to connect. Other than that worked fine. I just the OSD to change settings.

I had it worked for another 2 weeks and then it just stopped booting up. Won't connect to pc or boot up with lipo battery. Strange. Tried everything and it just does crazy led lightshows .

To sum it up , great feature set but poor overall quality. Seems like a waste of money now because I have to replace it.

Was this review helpful to you?