Home > Drones >

HyperLite FlowRide 5" Acro Freestyle Frame
HyperLite FlowRide 5" Acro Freestyle Frame

Alternative Views:

Our Price: $60.99
Sale Price: $54.99 CAD
Savings: $6.00

Stock Status: In Stock

HyperLite FlowRide 5" Acro Freestyle Frame

Like any good freestyle frame , the Flowride wears the LiPo on the back with the possibility of putting a cubic action cam (GoPro what).
Its designer (Kabab, the famous dentist who practices the FPV) has opted for simplicity and efficiency (I hope at least). After almost 1 year of prototyping , he has created this freestyle chassis weighing only 90 grams with all its accessories!
Of course, the Flowride is limited to the essentials and offers little space for mounting the electronics , just more than a "pod" chassis. Besides exit the camera full size and even mini. You need to install a FPV format camera using a very small support printed in 3D with TPU.
The "bus" of the chassis is truncated at the rear at the arms. It saves weight, frees space for airflow propellers (better efficiency and less prop-wash) but it also shifts the center of gravity of the front . Phenomenon accentuated by the shift of the "bus" forward for 2 reasons. First Kabab does not like to have propellers in the camera's field of vision and he prefers a quad slightly tilted forward that a quad that stays flat in its "natural" position.
The arms are the same as those proven on the Floss. They are small but thick 4mm and reinforced at the point of fractures by "pins" on the bottom plate with which they are sandwiched by a reinforcement plate. They also protect the engines very well that they do not position in "real" X. There is 9mm in addition which separates them in width compared to the length.

  • 5” ~90g
  • Width: 166mm
  • Length: 155mm
  • Weight: 90g
  • Only accepts MICRO camera's!

  • 1 X 2mm Top Plate Short Version
  • 1 X 2mm Top Plate Long Version
  • 1 X 2mm Bottom Plate
  • 1 x 2mm X Bracket
  • 4 x 4mm Arms
  • 4 x 6mm x 23mm Anodized Stand Offs (rear 4)
  • 2 x 5mm x 23mm Anodized Stand Offs (front 2)
  • 4 x M3x12mm 12.9 Grade bolts (inner 4 of the X bracket)
  • 4 x M3 x 16mm 12.9 Grade bolts (outer 4 of the X bracket)
  • 8 x M3 x 6mm 12.9 Grade bolts ( 6 for top plate and 2 bottom front)
  • 4 x M3 Anodized Lock Nuts
  • 1 x 3D printed Micro FPV Camera mount
  • 2 x HyperLite or PyroDrone Battery Strap

Share your knowledge of this product. Be the first to write a review »