Home > Drones >

EMAX Tinyhawk - Brushless 1S Whoop - RTF (TX, Goggles and more)
EMAX Tinyhawk - Brushless 1S Whoop - RTF (TX, Goggles and more)

Alternative Views:

Our Price: $219.99 CAD

Stock Status:(Out of Stock)
Product Code: EMX-2213

EMAX Tinyhawk - Brushless 1S Whoop - RTF (TX, Goggles and more)

Dismantling any conventional thinking, EMAX went back to the drawing board and created something new to reach all of its design goals with no compromise. The Tinyhawk offers incredible performance, thanks to a powerful F4 processor and ultra fast gyro system, creating the most stable flight experience ever in a mini race drone.

  • 75mm Indoor racing drone
  • 08025 brushless motor with durable ball bearing for increase flight and low maintenance
  • Durable polypropylene plastic frame with propeller guards
  • Motor beeper function. Find your tinyhawk after a crash
  • Speeds up to 56kph
  • Up to 4 minutes flight time on single battery
  • Fast F4 Processor for smooth stable flight characteristics
  • MPU6000 gyro for vibration free operations
  • Unique inverted motor design to keep CG as low as possible to fit in the smallest of spaces
  • 25mw VTX and 600tvl Camera included for fun FPV flight via FPV style goggles
  • Smart Audio function to change VTX channel via your transmitter
  • OSD settings control to customize flight feel
  • Pre-tuned from factory with expert pilots and new pilots in mind. 3 rate profile settings for all types of flying feel
  • Plug in type motors for easy maintenance
  • 1S High Voltage (HV) 450mah lipo included
  • Frsky compatible D8 receiver built in to FC
  • Custom carbon fiber themed carrying case

  • Frame
    • Size: 75mm motor to motor L 110mm x W 95mm x H 39mm
    • Dry Weight: 29g
    • All Up Weight: 42g with 450mah 1s Battery
    • Frame Material: Polypropylene
  • Props
    • Diameter: 40mm
    • Blades: 3
    • Pitch: 23mm
    • Weight: 0.5 g
  • Motors
    • Stator: 8mm x 2.5mm (08025)
    • Kv: 15000kv
    • Weight: 2.5g
    • Bearing Size: Φ1.5*Φ4*2mm
    • Shaft Diameter: Φ1.5mm
    • Propeller Mount: Press Fit Over Bell
  • Main PCB
    • Flight Controller: F4 (MATEKF411 firmware)
    • ESCs: 4in1 3A
    • Receiver: EMAX Tiny receiver (Compatible with Frsky D8 mode)
    • Battery Connector: JST-PH2
  • Camera and VTX
    • VTX Power: 25mw
    • Channels: 37CH
    • Camera Properties: 600TVL CMOS
    • Smart Audio
  • Battery
    • Voltage: 1S 4.35v HV
    • Capacity: 450 mAh
    • Discharge rating: 80c/160c
  • Goggles
    • Maximum appearance size 140×153×90(mm)
    • Weight (without battery) 398g
    • Resolution 480×272
    • Battery 1 cell 18650 lipo battery
  • E6 Transmitter
    • Size 181×213×80(mm)
    • Weight (without battery) 211g
    • Number of channels 6 Channels
    • Transmission frequency 2.4GHz ISM Band(2400MHz~2483.5MHz)
    • Output Power 22dbm
    • Modulation GFSK
    • Battery 1 cell 18650 lipo battery

  • Light weight soft carry case, with carbon fiber design
  • Tiny Hawk indoor flying drone
  • USB High Voltage capable 4 port USB Charger
  • 1S High Voltage (HV) 450mah lipo battery.
  • FPV Goggle: EMAX Transporter 40 channel
  • EMAX E6 Transmitter: 6 Channel
  • USB Cable for charging goggle, radio
  • Parts Bag
  • Phillips screwdriver
  • 2x 18650 Battery already pre-installed
  • 1 Set spare AVAN Tinyhawk 3 blade propellers.

Share your knowledge of this product. Be the first to write a review »