Home > Electronics >

Airbot Furling32 Metal 4-in-1 F3 ESC
Airbot Furling32 Metal 4-in-1 F3 ESC

Alternative Views:

Our Price: $94.99
Sale Price: $88.99 CAD
Savings: $6.00

Stock Status: In Stock
Product Code: ESC-AIRBOT-FURLIN32-4IN1-80124

Airbot Furling32 Metal 4-in-1 F3 ESC

The Airbot Furling32 BLHeli32 Metal ESC with F3 MCU is a 4-in-1 ESC with metal cased MOSFETs. The onboard F3 MCU allows tons of headroom for processing power, ensuring smooth and fast response.

Using metal case MOSFETs result in better heat dissipation. Tested a short time on 220A in total. The actual performance will only be limited by the air flow.

NOTE: The 4in1 connector for this ESC is different to previous Airbot 4in1 ESC, so take care when connecting this. Cables are NOT included!

  • F3 MCU
  • Metal MOSFETs
  • BLHELI32
  • Onboard analog current sensor
  • ESC Telemetry

  • 32bit ESC with BLHELI32 firmware
  • Supports 3-6S lipo input
  • PWM input, TLM supported
  • Voltage output (VBAT)
  • ADC Current sensor
  • ESC Telemetry pad
  • NO BEC
  • Supports oneshot / Multishot / Dshot PWM
  • Mounting holes 30.5×30.5mm
  • Supports damped light
  • F3 MCU, runs double faster than F051
  • Extra Cap needed for high current or 6s usage

Please use non-metallic isolation standoffs (marked in red in the diagram below) for the mounting holes on the ESC, Because mounting holes and motor pad are connected.

  • 1 x Tekko32 F3 Metal 4in1 ESC

Share your knowledge of this product. Be the first to write a review »