Home > Drones >

Eachine Wizard X220S ARF FPV Racer (CF Arms Upgrade)



 
Alternative Views:


Our Price: $239.99 CAD

Stock Status:In Stock
Product Code: EACHINE-WIZ-X220S-ARF-657277
Qty:

Description
 
Eachine Wizard X220S ARF FPV Racer

*Update: This product now ships with full carbon fiber arms. This has greatly improved the durability of the quad!

Eachine Wizard X220SWheelbase: 220mm
Frame arm: 4mm light material
Weight: 356g (without battery and camera mount)
Take off weight: 561g
Use light composite material.
4mm thickness and 15mm width frame arms, the width is 5mm less than Eachine Wizard X220.
Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session.
Anti-vibration sponges to protect the racer frome crashing.

Eachine MN2206 2300KV motor
2206 2300kv
Max thrust: 1100G
Length: 35MM
NO.OF cell: 3-5S
Diameter: 28MM
Framework: 12N14P
Shaft: 3MM
Propeller: 5 inch
Weight: 28g
Eachine 30A BLHELI_S 4 in 1 ESCCon. current: 30A
Peak current (10S): 35A
Input voltage: 2-5S
BEC: No
Programming: YES
Firmware: blheli_s
Weight: 28g
Size: 36*36MM

Eachine 1179 800TVL CCD camera Color: purple
Sensor: CCD
Resolution(horizontal center): 800TVL
Shell size: 25mm*25mm
Weight: 11g
Resolution: PAL: 1980H×1080 (2MP) NTSC: 1980H×1080V (2MP)
Format: PAL/NTSC switchable
Video output: 1.0Vp-p/75Ω
Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB.
AWB: ON/OFF
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) - 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: internal synchronization
Lens: standard 2.8mm lens
Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V)
Workig current: 70mA (low power consumption)
Workig temperature: -20℃--60℃
Humidity: 0%~98%
Strong backlighting effect

5.8G 72CH 25MW 200mw 600MW
switchable transmitter
Video Format : NTSC/PAL
Channel: 72CH
Operating Temperature : -10~85℃
Connector: SMA Female (Inner hole)
Antenna Connector: RP-SMA male (Inner needle)

Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 800TVL CCD iRangeX iRX-i6X RTF

BF3.1.5 Omnibus F4 V2 flight controller
Size: 35x35mm
Mounting hole: 30.5x30.5mm
Firmware: betaflight_3.1.5_OMNIBUSF4SD
Input voltage: 2-6S
SCM: STM32 F405 MCU
Sensor: SPI Sensor MPU6000
Berometer: BMP280
Slot: standard SD card slot
BEC: 5V/3A
STM32 F405 MCU, Runs betaflight_3.1.5_OMNIBUSF4SD, could run faster loop time.
Using F4 MCU controls OSD over SPI bus in DMA mode.
OSD Configation has been included in Betaflight GUI.
Built-in 5V/3A BEC.
Built-in galvanometer.
With LC filter.

Eachine 5051 3-blade propellerLength: 5"
Color: purple
Quantity: 10 Pairs
Mounting Hole: 5mm

*
This is the ARF version that comes without battery, charger, receiver and remote control.

PACKAGE CONTENTS
  • 1 x Eachine Wizard X220S frame kit
  • 4 x 2206 2300KV motor
  • 1 x Eachine 30A BLHELI_S 4 in 1 ESC
  • 1 x BF3.1.5 Omnibus F4 V2 flight controller
  • 1 x 800TVL camera
  • 1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX
  • 10 x Eachine 5051 3-blade propeller purple CW
  • 10 x Eachine 5051 3-blade propeller purple CCW
  • 1 x 30° Camera Mount(For RunCam3/GoPro Session)
  • 1 x Pagoda antenna (RP-SMA)
  • 2 x Battery strap
  • 2 x Wrench
  • (Package doesn't include RunCam 3, the RunCam 3 on the pictures for reference only.)

Share your knowledge of this product. Be the first to write a review »